Release information for the latest version
3DTascalX Past Version Release Information
■ – – – Contents for change of the interface option products
3DTascalX V9.40 [2019/04/09]
□[IGES(R)] Fixed a case where hierarchical division at a level-value was not possible.
□[IGES(R)] Fixed a case where loading of parts hierarcy by the layers.
□[IGES(R)] Fixed a problem that a trim error occurred.
□[STEP(R)] Fixed a problem that the file read did not end.
□[IGES(W)] Speeding up the file output performance.
□[STEP(W)] If the output file is opened in other CAD, the defect that missing part is fixed.
□[STEP(W)] If the output file is opened in other CAD, the file cann’t reading is fixed.
■[CATIA(R/W)] available at V5-6 R2018.
■[NX(R)] available at NX12.
■[CREO(R)] available at Creo 4.0.
■[ACIS(R/W)] available at R28.
■[ACIS(W)] Add writeing option, Divide a Face that makes a round.
■[CATIA(R)] Fixed a problem that the surface color could not be properly imported with some data.
■[JT(R)] Fixed a problem where the file could not be loaded when the file was placed on the M: drive.
■[ACIS(W)] Fixed the problem that the output of the trim shape might fail.
3DTascalX V9.31 [2018/10/25]
□[Startup] Fixed bug in license activation at startup.
3DTascalX V9.30 [2018/10/02]
□[Dimension Layout] After layouting,display form “Side” was incorect. it was corrected.
□[IGES(R)] The defect which goes through a face when a certain file is read, it was corrected.
□[STEP(R)] The defect which can’t normally read a certain file, it was corrected.
□[STEP(R)] The defect which ends abnormally when a certain file is read, it was corrected.
□[IGES(R)] The defect which goes through a face when a certain file is read, it was corrected.
□[Parasolid(R)] The models which has so deep hierarchy doesn’t finish reading. it was corrected.
■[CFIO(R)] Reading-Library was changed.
■[CFIO(R)] The models which was created by mirroring doesn’t read correct. it was corrected.
■[CFIO(R)] The defect which ends abnormally when a certain file is read, it was corrected.
3DTascalX V9.20 [2018/03/28]
□[SOLIDWORKS(R/W)] Support SOLIDWORKS 2018 data.
□[SOLIDWORKS Plugin] Support SOLIDWORKS 2018 environment.
□[General] The defect by which operation becomes slow extremely was corrected.
□[3DX(R)] The processing when holding 3DX filing of Classify Thickness by Color, was speed up.
(When the file preserved after V9.20 is read after V9.20.)
□[IGES(R)] Fix uped face generation of a part of IGES files.
□[i2xPlus] Fix uped outputing for virtual drive which was assigned network drive.
3DTascalX V9.10 [2018/01/05]
□[Platform] Excluded Windows8.0 from target OS.
□[i2xPlus] When there were the specific file name and folder name, the defect which fails in a change was corrected.
□[TableEditor Plus] Updated to TableEditor Plus from TableEditor.
□[3DTascalX,i2xPlus] The option which ignores transparent color at the time of file reading was added.
□[IGES(R)] The defect which goes through a face when a certain file is read, it was corrected.
□[IGES(W)] When the IGES file with the big size was output,
the defect by which the file can’t be read was corrected.
□[STEP(R)] The defect which can’t normally read a certain file, it was corrected.
□[STEP(R)] The defect which ends abnormally when a certain file is read, it was corrected.
□[STEP(W)] Improve for STEP file form 3DTascalX.
□[STEP(W)] It can show face colors truely on CATIA V5.
□[DXF(R)] Supported at binary DXF file.
■[CATIA(R)] available at V5-6 R2017.
■[NX(R)] available at NX11.
■[CADCEUS(R)] The shape was semitransparent and the defect which is sometimes taken in was corrected.
■[CADCEUS(R)] An associate coordinate corrected the defect which sometimes slips.
3DTascalX V9.00 [2017/06/26]
□Start of the “3DTascalX V9.00” release