3DTascalX/Light Release information

https://www.3dtascal.com/en/user/tascal_light_release.html

3DTascalX/Light Release information

3DTascalX/Light V10.00 [2019/08/05]

Specifically, please confirm it from [here].

3DTascalX/Light V9.40 [2019/04/09]

□[IGES(R)] Fixed a case where hierarchical division at a level-value was not possible.

□[IGES(R)] Fixed a case where loading of parts hierarcy by the layers.

□[IGES(R)] Fixed a problem that a trim error occurred.

□[STEP(R)] Fixed a problem that the file read did not end.

■[CATIA(R)] Fixed a problem that the surface color could not be properly imported with some data.

■[CATIA(R)] available at V5-6 R2018.

■[NX(R)] available at NX12.

■[CREO(R)] available at Creo 4.0.

■[ACIS(R)] available at R28.

3DTascalX/Light V9.30 [2018/10/02]

□[Dimension Layout] After layouting,display form “Side” was incorect. it was corrected.

□[IGES(R)] The defect which goes through a face when a certain file is read, it was corrected.

□[STEP(R)] The defect which can’t normally read a certain file, it was corrected.

□[STEP(R)] The defect which ends abnormally when a certain file is read, it was corrected.

□[IGES(R)] The defect which goes through a face when a certain file is read, it was corrected.

□[Parasolid(R)] The models which has so deep hierarchy doesn’t finish reading. it was corrected.

3DTascalX/Light V9.20 [2018/03/28]

□[SOLIDWORKS(R)] Support SOLIDWORKS 2018 data.

□[General] The defect by which operation becomes slow extremely was corrected.

□[3DX(R)] The processing when holding 3DX filing of Classify Thickness by Color, was speed up.

 (When the file preserved after V9.20 is read after V9.20.)

□[IGES(R)] Fix uped face generation of a part of IGES files.

3DTascalX/Light V9.10 [2018/01/05]

□[CATIA(R)] available at V5-6 R2017.

□[NX(R)] available at NX11.

□[3DTascalX,i2xPlus] The option which ignores transparent color at the time of file reading was added.

□[Platform] Excluded Windows8.0 from target OS.

□[i2xPlus] When there were the specific file name and folder name, the defect which fails in a change was corrected.

□[STEP(R)] The defect which can’t normally read a certain file, it was corrected.

□[STEP(R)] The defect which ends abnormally when a certain file is read, it was corrected.

□[IGES(R)] The defect which goes through a face when a certain file is read, it was corrected.

3DTascalX/Light V9.00 [2017/06/27]

□Start of the “3DTascalX/Light V9.00” release